APC SC450RMI1U Description:
APC Smart-UPS SC 450VA 1U Rackmount/Tower
450VA/280W CAPACITY, 230V
Overview
Availability
-
Boost and Trim Automatic Voltage Regulation (AVR)
-
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
-
Intelligent battery management
-
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Power conditioning
-
Protects connected loads from surges, spikes, lightning, and other power disturbances.
-
Temperature-compensated battery charging
-
Prolongs battery life by regulating the charge voltage according to battery temperature.
-
Automatic restart of loads after UPS shutdown
-
Automatically starts up the connected equipment upon the return of utility power.
-
Automatic self-test
-
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
-
Disconnected battery notification
-
Warns when a battery is not available to provide backup power.
Manageability
-
Network manageable
-
Provides remote management of the UPS over the network.
-
Audible alarms
-
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
-
LED status indicators
-
Quickly understand unit and power status with visual indicators.
-
Serial Connectivity
-
Provides management of the UPS via a serial port.
USB connectivity
-
Provides management of the UPS via a USB port (not available on all models).
-
Disconnected battery notification
-
Warns when a battery is not available to provide backup power.
Serviceability
-
User-replaceable batteries
-
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
-
Hot-swappable batteries
-
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
-
Predictive failure notification
-
Provides early-warning fault analysis ensuring proactive component replacement.
-
Resettable circuit breakers
-
Enables a quick recovery from overload events.
-
Battery failure notification
-
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Adaptability
-
Adjustable voltage-transfer points
-
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
-
Adjustable voltage sensitivity
-
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Safety
-
Safety-agency approved
-
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Specifications
Output
-
Output Power Capacity
-
280 Watts/450 VA
-
Max Configurable Power
-
280 Watts/450 VA
-
Nominal Output Voltage
-
230V
-
Output Voltage Distortion
-
Less than 5% at full load
-
Output Frequency (sync to mains)
-
47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
-
Topology
-
Line Interactive
-
Waveform Type
-
Stepped approximation to a sinewave
-
Output Connections
-
(4) IEC 320 C13 IEC 320 C13
-
(2) IEC Jumpers
Input
-
Nominal Input Voltage
-
230V
-
Input Frequency
-
50/60 Hz +/- 3 Hz (auto sensing)
-
Input Connections
-
IEC-320 C14
-
Input voltage range for main operations
-
160 - 286V
-
Input voltage adjustable range for mains operation
-
151 - 302V
Batteries & Runtime
-
Battery Type
-
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-
Typical recharge time
-
5 hour(s)
-
Replacement Battery
-
RBC18
-
RBC™ Quantity
-
Hover over the line on the graph above to view the runtime at any desired load
-
Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output.
-
View Enlarged Graph
Communications & Management
-
Interface Port(s)
-
DB-9 RS-232
-
Control panel
-
LED status display with On Line : On Battery : Replace Battery and Overload indicators
-
Audible Alarm
-
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
-
Emergency Power Off (EPO)
-
Optional
Surge Protection and Filtering
-
Surge energy rating
-
320 Joules
-
Filtering
-
Full time multi-pole noise filtering : 0.7% IEEE surge let-through : zero clamping response time : meets UL 1449
-
Data Line Protection
-
RJ-11 2-Way Modem/Fax/DSL splitter with protection (four wire dual lines), RJ45 10/100 Base-T Ethernet protection
Physical
-
Maximum Height
-
44.00 mm
-
Maximum Width
-
432.00 mm
-
Maximum Depth
-
383.00 mm
-
Rack Height
-
1U
-
Net Weight
-
10.18 KG
-
Shipping Weight
-
11.73 KG
-
Shipping Height
-
164.00 mm
-
Shipping Width
-
476.00 mm
-
Shipping Depth
-
589.00 mm
-
Color
-
Grey
-
Units per Pallet
-
24.00
Environmental
-
Operating Environment
-
0 - 40 °C
-
Operating Relative Humidity
-
0 - 95%
-
Operating Elevation
-
0-3000 meters
-
Storage Temperature
-
-15 - 45 °C
-
Storage Relative Humidity
-
0 - 95%
-
Storage Elevation
-
0-15000 meters
-
Audible noise at 1 meter from surface of unit
-
38.00 dBA
-
Online Thermal Dissipation
-
38.00 BTU/hr
Conformance
-
Regulatory Approvals
-
C-tick, CE, GOST, VDE
-
Standard Warranty
-
2 years repair or replace
Sustainable Offer Status
-
RoHS
-
Compliant
-
Other Environmental Compliance
-
China RoHS